infoscreen-dev/HDMI_CEC_SETUP.md

HDMI-CEC Setup and Configuration

Overview

The Infoscreen Client now includes automatic TV control via HDMI-CEC (Consumer Electronics Control). This allows the Raspberry Pi to turn the connected TV on/off automatically based on event scheduling.

Features

• Auto TV Power On: TV turns on when an event starts
• Auto TV Power Off: TV turns off (with delay) when no events are active
• Smart Event Switching: TV stays on when switching between events
• Configurable Delay: Prevent rapid on/off cycles with configurable turn-off delay
• Graceful Shutdown: TV turns off when Display Manager stops

How It Works

Event Lifecycle

1. Event Starts → TV powers on via HDMI-CEC → Display content
2. Event Switches → TV stays on → New content displays
3. Event Ends → Wait for delay period → TV powers off (if no new events)
4. Service Stops → TV powers off after delay

CEC Commands

The system uses cec-client from the cec-utils package to send commands:

• Power On: echo "on 0" | cec-client -s -d 1
• Power Off: echo "standby 0" | cec-client -s -d 1
• Query Status: echo "pow 0" | cec-client -s -d 1

Installation

1. Install CEC Utils

sudo apt-get update
sudo apt-get install cec-utils

2. Test CEC Connection

Check if your TV is detected:

echo "scan" | cec-client -s -d 1

You should see output showing detected devices, including your TV (usually device 0).

3. Test Manual Control

Turn TV on:

echo "on 0" | cec-client -s -d 1

Turn TV off:

echo "standby 0" | cec-client -s -d 1

Check TV power status:

echo "pow 0" | cec-client -s -d 1

Configuration

Add these environment variables to your .env file:

# HDMI-CEC Configuration
CEC_ENABLED=true              # Enable/disable CEC control (true/false)
CEC_DEVICE=0                  # Target device (0 for TV - recommended, or "TV")
CEC_TURN_OFF_DELAY=30         # Seconds to wait before turning off TV
CEC_POWER_ON_WAIT=5           # Seconds to wait after power ON (for TV boot)
CEC_POWER_OFF_WAIT=2          # Seconds to wait after power OFF

Configuration Options

Variable	Default	Description
CEC_ENABLED	true	Enable or disable HDMI-CEC control
CEC_DEVICE	0	CEC device identifier - use 0 for TV (recommended), or "TV" for slower name-based lookup
CEC_TURN_OFF_DELAY	30	Seconds to wait after last event ends before turning off TV
CEC_POWER_ON_WAIT	5	Seconds to wait after sending power ON (allows TV to boot up)
CEC_POWER_OFF_WAIT	2	Seconds to wait after sending power OFF

Delay Configuration Examples

# Quick turn-off (10 seconds)
CEC_TURN_OFF_DELAY=10

# Standard delay (30 seconds) - recommended
CEC_TURN_OFF_DELAY=30

# Long delay (2 minutes)
CEC_TURN_OFF_DELAY=120

# Immediate turn-off (not recommended - may cause flicker)
CEC_TURN_OFF_DELAY=0

Troubleshooting

TV Not Responding

1. Check CEC is enabled on TV

   • Enter TV settings menu
   • Look for "HDMI-CEC", "Anynet+", "Bravia Sync", or similar
   • Enable the feature

2. Verify CEC detection

   echo "scan" | cec-client -s -d 1
   

   Should show your TV as device 0

3. Test direct commands

   # Try turning on
   echo "on 0" | cec-client -s -d 1
   
   # Check power status
   echo "pow 0" | cec-client -s -d 1
   

CEC Utils Not Found

If you see "cec-client not found" errors:

# Install the package
sudo apt-get install cec-utils

# Verify installation
which cec-client

TV Turns Off Too Quickly

Increase the turn-off delay:

# In .env file
CEC_TURN_OFF_DELAY=60  # Wait 60 seconds

TV Doesn't Actually Turn On/Off

If cec-client reports success but the TV doesn't respond:

1. Increase wait times - Some TVs are slow to respond:

   # In .env file
   CEC_POWER_ON_WAIT=10    # Wait 10 seconds for TV to boot
   CEC_POWER_OFF_WAIT=5    # Wait 5 seconds for TV to power down
   

2. Check TV CEC settings - Make sure CEC is enabled:

   • Look for "HDMI-CEC", "Anynet+", "SimpLink", or similar in TV settings
   • Some TVs require specific CEC modes (e.g., "Full" vs "Limited")

3. Test with longer delays:

   echo "on 0" | cec-client -s -d 1
   sleep 10  # Wait and watch the TV
   echo "pow 0" | cec-client -s -d 1  # Check if it actually turned on
   

4. Try the standby device address:

   # In .env file
   CEC_DEVICE=0  # Use numeric device ID instead of "TV"
   

TV Turns Off During Events

Check the logs for timing issues:

tail -f ~/infoscreen-dev/logs/display_manager.log | grep -i cec

Look for:

• "Turning TV ON via HDMI-CEC" when events start
• "Scheduling TV turn-off" when events end
• "Cancelled TV turn-off timer" when new events arrive

Disable CEC Temporarily

To disable CEC without uninstalling:

# In .env file
CEC_ENABLED=false

Or via environment variable:

export CEC_ENABLED=false
./scripts/start-display-manager.sh

Logs and Debugging

Enable Debug Logging

# In .env file
LOG_LEVEL=DEBUG

Monitor CEC Activity

# Watch CEC-related log entries
tail -f ~/infoscreen-dev/logs/display_manager.log | grep -E "(CEC|TV|turn)"

Typical Log Sequence

[INFO] HDMI-CEC controller initialized (device: TV, turn_off_delay: 30s)
[INFO] TV detected as ON
[INFO] Starting display for event: presentation_slides.pdf
[INFO] Turning TV ON via HDMI-CEC...
[INFO] TV turned ON successfully
[INFO] Display started successfully for presentation_slides.pdf
... (event runs) ...
[INFO] No active events in time window - stopping current display
[INFO] Scheduling TV turn-off in 30s...
... (30 seconds later) ...
[INFO] Turning TV OFF via HDMI-CEC...
[INFO] TV turned OFF successfully

Hardware Requirements

Compatible Hardware

• Raspberry Pi 4/5: Full HDMI-CEC support
• Raspberry Pi 3: Full HDMI-CEC support
• TV: Must support HDMI-CEC (check TV manual)

HDMI Cable

• Use a high-quality HDMI cable
• CEC signals are part of the HDMI standard, but cheap cables may have issues
• Cable length should be under 5 meters for reliable CEC

TV Brands and CEC Names

Different manufacturers use different names for HDMI-CEC:

Brand	CEC Name
Samsung	Anynet+
LG	SimpLink
Sony	Bravia Sync
Panasonic	VIERA Link
Toshiba	CE-Link
Sharp	Aquos Link
Philips	EasyLink
Generic	HDMI-CEC

Advanced Usage

Manual CEC Commands

You can manually control the TV using the CEC controller:

# In Python code or interactive shell
from display_manager import HDMICECController

cec = HDMICECController(enabled=True, device="TV", turn_off_delay=30)

# Turn on immediately
cec.turn_on()

# Turn off immediately
cec.turn_off(delayed=False)

# Turn off with delay
cec.turn_off(delayed=True)

# Cancel pending turn-off
cec.cancel_turn_off()

Custom CEC Device

If your TV isn't responding to device "TV", try using the numeric address:

# In .env file
CEC_DEVICE=0  # Most TVs are device 0

Or find your device:

echo "scan" | cec-client -s -d 1
# Look for device addresses in output

Testing Without a TV

For development/testing without a physical TV:

# Disable CEC
CEC_ENABLED=false

# Or install cec-client but commands will harmlessly fail

Integration with Event Scheduler

The CEC controller integrates seamlessly with the event scheduler:

1. Timed Events: TV turns on at event start time, off after event end time + delay
2. Continuous Events: TV stays on during event sequences
3. Manual Control: Events can still be manually started/stopped
4. Power Saving: TV automatically turns off when idle

Example Event Schedule

{
  "event_type": "presentation",
  "start": "2025-11-12 09:00:00",
  "end": "2025-11-12 09:30:00",
  "presentation": {
    "files": [{"name": "morning.pdf"}]
  }
}

Timeline:

• 09:00:00: Event starts → TV turns ON → Presentation displays
• 09:30:00: Event ends → Presentation stops → TV turn-off scheduled
• 09:30:30: (30s later) → TV turns OFF

Security Considerations

• CEC commands are broadcast over HDMI (local only)
• No network exposure
• Only controls connected TV on same HDMI bus
• No authentication required (physical connection = authorization)

Performance Impact

• Minimal CPU usage (< 1%)
• CEC commands complete in 1-2 seconds
• No impact on display performance
• Commands run in background threads

Known Limitations

1. Single TV: Controls one TV per HDMI output
2. CEC Support Required: TV must support HDMI-CEC
3. Command Reliability: Some TVs respond slower than others
4. No Status Feedback: Limited ability to verify TV actually turned on/off
5. HDMI Connection Required: Must be physically connected via HDMI

Future Enhancements

Potential future improvements:

• Multi-monitor support
• TV volume control
• Input source switching
• Enhanced status detection
• Custom CEC command sequences
• Event-specific CEC behaviors

Support and Feedback

If you encounter issues:

1. Check logs: ~/infoscreen-dev/logs/display_manager.log
2. Verify CEC is working: echo "scan" | cec-client -s -d 1
3. Test manual commands: echo "on 0" | cec-client -s -d 1
4. Check TV settings for CEC enable
5. Review this documentation

For bugs or feature requests, please file an issue on GitHub.