# Screenshot capture behavior
# Set to 1 to force captures even when no display is active (useful for testing)
# In production, prefer 0 so captures only occur when a presentation/video/webpage is running
SCREENSHOT_ALWAYS=0
# Infoscreen Client Configuration Template
# Copy this file to .env and adjust values for your setup

# Environment (set for small prod-like test)
# IMPORTANT: CEC TV control is automatically DISABLED when ENV=development
# to avoid constantly switching the TV on/off during testing.
# Set to 'production' to enable automatic CEC TV control.
ENV=development      # development | production
DEBUG_MODE=0         # 1 to enable debug mode
LOG_LEVEL=INFO       # DEBUG | INFO | WARNING | ERROR

# MQTT Broker Configuration
MQTT_BROKER=<your-mqtt-broker-host-or-ip>    # Change to your MQTT server IP
MQTT_PORT=1883

# Timing Configuration (quieter intervals for productive test)
HEARTBEAT_INTERVAL=60        # Heartbeat frequency in seconds
SCREENSHOT_INTERVAL=180            # Screenshot transmission (simclient)
SCREENSHOT_CAPTURE_INTERVAL=180    # Screenshot capture (display_manager)
DISPLAY_CHECK_INTERVAL=15    # Display Manager event check frequency in seconds

# File/API Server (used to download presentation files)
# By default, the client rewrites incoming file URLs that point to 'server' to this host.
# If not set, FILE_SERVER_HOST defaults to the same host as MQTT_BROKER.
# You can also set FILE_SERVER_BASE_URL (e.g., http://192.168.1.10:8000) to override entirely.
FILE_SERVER_HOST=            # optional: e.g., 192.168.43.100
FILE_SERVER_PORT=8000        # default port for API server
FILE_SERVER_SCHEME=http      # http or https
# FILE_SERVER_BASE_URL=       # optional: takes precedence over the above when set

# HDMI-CEC TV Control (optional)
# Automatically turn TV on/off based on event scheduling
# NOTE: CEC is automatically DISABLED when ENV=development to avoid constantly switching TV on/off during testing
CEC_ENABLED=true             # Enable automatic TV power control in production (true/false)
CEC_DEVICE=0                 # Target CEC device (TV, 0, etc.)
CEC_TURN_OFF_DELAY=30        # Seconds to wait before turning off TV after last event ends
CEC_POWER_ON_WAIT=5          # Seconds to wait after power ON command (for TV to boot up)
CEC_POWER_OFF_WAIT=5         # Seconds to wait after power OFF command (increased for slower TVs)

# TV Power Intent (MQTT-based coordinated power control, Phase 1)
# Controls how the display manager decides whether to use local CEC or server-issued intent.
#   local  — ignore MQTT intents; all power decisions are local (safe default for rollout)
#   hybrid — prefer MQTT intent when present and valid; fall back to local CEC if not
#   mqtt   — MQTT intent is authoritative; local CEC only fires as last-resort guard
# See README.md "TV Power Intent — Rollout Runbook" before changing from 'local'.
POWER_CONTROL_MODE=local     # local | hybrid | mqtt

# Optional: MQTT authentication (if your broker requires username/password)
#MQTT_USERNAME=
#MQTT_PASSWORD=

# Optional TLS settings (if using secure MQTT)
#MQTT_TLS_CA_CERT=
#MQTT_TLS_CERT=
#MQTT_TLS_KEY=

# Notes:
# - Keep actual secrets and host-specific values in a local .env file that is NOT committed.
# - This template is safe to check into version control.